В ядре Linux устранена следующая уязвимость:
fbdev: rivafb: исправлена ошибка разделения в nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
ioctl FBIOPUT_VSCREENINFO в /dev/fb*. При этом водитель
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
сначала. In a normal setup, state->mclk_khz is provided by the real hardware and is
ненулевой.
However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Однажды
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before
делаю деление.
Следующий журнал показывает это:
rivafb: установка виртуального разрешения Y на 2184
ошибка деления: 0000 [#1] ПРЕДЕМПТ СМП КАСАН ПТИ
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Отслеживание вызова:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 фс/ioctl.c:856
Показать оригинальное описание (EN)
In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856